Installation Manual:
1.The matching is consistent with the old 5Q0 tire pressure (note: the tire pressure module does not need to write parameters, change the code).
2. After the installation is completed, press the four tires to about 3.0
3. Remove 65 tire pressure module faults with ODIS
4. Turn on/off the power of the vehicle key, and keep the vehicle powered on (do not start the engine).
5. Adjust the gauge to the tire pressure interface, and continue to deflate the left front wheel until the gauge shows the left front tire pressure value.
6. Turn on/off the key power once, adjust the meter to the tire pressure interface, and continue to deflate the right front wheel until the instrument displays the left front tire pressure value.
7. Turn on/off the key power once, adjust the instrument to the tire pressure interface, and continuously and quickly deflate the right rear wheel until the instrument displays the left front tire pressure value.
8. Turn on/off the key power once, adjust the meter to the tire pressure interface, and continuously and quickly deflate the left rear wheel until the instrument displays the pressure value of the left front tire.
9. Finally, adjust the pressure of the four tires to the required value, and then the matching is completed.
USD
